Concrete Contractor — North Texas & Panhandle

Panhandle and West Texas slab pricing typically runs $6–$11+ per square foot installed. Rural ranch sites, caliche rock, long-haul concrete routes and wind-load requirements can move pricing higher. Every quote is free, written and itemized.

Most North Texas Panhandle projects schedule within 2–4 weeks of quote acceptance, weather and permitting depending. The pour itself is typically 1–3 days on site once forms and rebar are set. We plan around Panhandle wind, cold snaps and caliche conditions.

We engineer every pour for Panhandle conditions — high wind exposure, freeze-thaw cycles and expansive West Texas clay. That means deeper footings, #3 / #4 rebar, 3,000+ PSI mix, proper sub-base compaction and drainage that pulls water away from the slab edge.

Amarillo, Lubbock, Midland, Odessa, Abilene, Wichita Falls, San Angelo, Plainview, Pampa, Borger, Dumas, Hereford, Canyon, Big Spring, Snyder, Sweetwater, Brownwood, Vernon, Childress, Muleshoe, Levelland, Seminole, Andrews and more. We cover Potter, Randall, Lubbock, Midland, Ector, Taylor, Wichita, Tom Green, Hale, Floyd, Gray, Carson, Hutchinson, Moore, Deaf Smith, Parmer, Bailey, Lamb, Hockley, Cochran, Dawson, Borden, Scurry, Fisher, Jones, Nolan, Howard, Mitchell, Martin, Andrews, Winkler, Crane, Glasscock, Reagan, Irion, Sterling, Concho, Runnels, Coleman, Brown, Callahan, Eastland, Stephens, Shackelford, Haskell, Throckmorton, Young, Jack, Archer, Clay, Montague, Cooke and surrounding counties. Travel beyond our standard service radius is quoted transparently.

We pour monolithic slabs, stem-wall foundations, post-tension slabs, floating slabs, thickened-edge slabs, and engineered building pads for residential homes, barndominiums, metal buildings, shops, garages, RV pads, patios, and driveways across Amarillo, Lubbock, Midland, Odessa, and surrounding areas.

Yes. Barndominium and metal building foundations are a core part of our work. We size footings and anchor bolt patterns to match your building specs, engineer for wind uplift, and ensure the slab is poured level and square so your metal building or barndo goes up without issues.

Most residential slabs are 4 inches thick, with 6–12 inch thickened edges and footings. Heavy loads, barndominiums, and commercial slabs may require 5–6 inches or more. We design thickness and reinforcement based on soil conditions, load requirements, and local building codes.

Yes. We build concrete driveways, patios, sidewalks, and curbs throughout the Panhandle. Choose broom, smooth, or stamped finishes. Every pour is reinforced and pitched for drainage so it holds up to West Texas sun, wind, and storms.

We handle the concrete work side of permits and can coordinate with your engineer or architect. Site prep includes grading, forming, sub-base compaction, and steel placement. If caliche removal or significant grading is needed, we include it in your transparent, written quote.

We stand behind our workmanship with a workmanship guarantee on every pour. While concrete cracking from natural shrinkage or ground movement is not fully preventable, we minimize it through proper reinforcement, control joints, base prep, and curing. If an issue is due to our workmanship, we make it right.

Fill out the quote form on this page, call 361-484-2417, or email sales@hillcountryconcreteslabs.com. Tell us your project size, location, and intended use. We respond within one business day with a free, itemized, no-pressure estimate.

We offer broom finish, smooth trowel, exposed aggregate, and stamped concrete for driveways, patios, walkways, and pool decks across the Panhandle. Stamped and decorative finishes are sealed for UV and dust protection so they hold up under West Texas sun and wind.

Yes. We pour reinforced RV pads, heavy equipment pads, crane pads, and commercial-grade slabs rated for the loads you specify. Thickness, reinforcement, and base prep are engineered for the vehicle or equipment weight and Panhandle soil conditions.

Standard concrete reaches initial set in 24–48 hours and achieves most of its design strength in 7 days, with full cure around 28 days. In Panhandle heat and wind, we protect pours with curing compound, moisture retention, and wind breaks to prevent rapid evaporation and surface crusting.

Yes. We pour warehouse slabs, distribution center floors, shop floors, crane pads, and industrial foundations throughout North Texas and the Panhandle. We work with your engineer on flatness, load ratings, joints, and drainage.